ここから本文です
TWO:"Kiss me," said Felipa.
Classification by type of system
1natural circulation external heating pipe type
2natural circulation calandria type
3forced circulation type
4falling-film type
5rising film type
6jacket type
7coil type
Classification by method of operation
1single effect evaporator system
2multiple effect evaporator system
3auto-vapor mechanical compression system
4auto-vapor ejector compression system
5multistage flash system

After taking into consideration of the physical and chemical property of solutions, the desired design conditions, and available utilities, we select the most suitable type of system by utilizing our years of experience and excellent results.
In addition, we can offer designs and manufacturing services that take into careful consideration compactness, energy-efficiency, and automatization.

THREE:He was waking now to his work. But he had enough of horses. He stopped, sheathed his knife, and, feeling in his pockets, drew out a box of matches. A little spluttering flame caught in a pile of straw, and showed a hind foot dragging helplessly. It crept up, and the mule plunged on three legs, dragging the other along. It snorted, and then every animal in that corral, which was the quartermaster's, smelt danger and snorted too, and struck from side to side of its stall. Those in the next corral caught the fear.The sentry was of the opinion that it was an unseemly hour to arouse a man who had marched all day, but it was not for him to argue. He walked deliberately, very deliberately indeed, that the citizens might be impressed, over to Landor's tent and awoke him. "There's two citizens here, sir, asking to see you,[Pg 111] sir." His tone plainly disclaimed any part in the affair.

While standard calandria type evaporation systems are widely used as the typical concentration evaporator by the various food and chemical industries, we have delivered many of those systems as finishing concentration evaporators especially for sugar solutions and starch syrups.

THREE:
  • Enables flexible operation with little influence from variations in load and raw solution concentrations because of an adequate amount of solution being held within the system. These systems are also suitable for batch type burning evaporators.
  • Concentrations can be controlled within product specifications by the cascade control using the concentrations of concentrated solution and the raw solution supply and also by the arithmetic control of raw solution concentrations, etc. (Result for sugar solutions: 75±0.2wt%)
  • High-viscosity solutions and solutions that may crystallize can also be utilized by installing a propeller in the evaporator as a forced circulation system.
THREE:

This is a process example of a device that continuously and simultaneously concentrates two types of waste liquid with a single high-efficiency steam compressor.

THREE:As an attempt at consolation, it failed. Landor fairly sprang into a sitting posture, with a degree of impulsiveness that was most unusual with him. His eyes glistened from the greenish circles around them. "Blow over! Good Lord! do you suppose I'll let it blow over? It's got to be sifted to the bottom. And you know that as well as I do." He lay weakly back again, and Felipa came to the edge of the bed and, sitting upon it, stroked his head with her cool hand.
  • By evaporating the steam using a mechanical compressor and reusing it, almost no heating steam is alomost required except the time of start-up, so large energy savings can be expected.
  • By combining with a thin film falling heat exchanger that does not raise the boiling point due to the liquid depth, it is possible to utilize the temperature difference of the compressor at the maximum.
  • Since the residence time and heating time are short and the holding amount is small, starting and stopping can be performed in a short time.
  • It will prevent scale adhesion in the can that the evaporator is divided into two parts, and that the supply of the undiluted solution is alternately switched over a fixed period of time to perform heat concentration.